|
Post by Admin on Jan 29, 2014 19:20:24 GMT
to joey your head light. 1-remove the headlights from the car 2-remove the 4 metal clips on each headlight by putting a screwdriver under and popping them off. 3-then run a heat gun around the edge where the glass lens and backing meet. try not to melt the plastic bits. 4-use a flat headed screwdriver to prise apart the glass from the headlight. 5-now you have the headlight apart you need paint the outside bits of the chrome part of the headlight like this use a brush is best and dont mask up on the silver bit as it tends to come off when you lift the masking off. 6- now clean up the area where the glass lens needs to seal against and put a thin line of silicone around it. dont use to much and when you push the glass back on otherwise it will squirt inside the lens where you cant wipe it of without taking it all apart again. 7-then pop the metal clips back on. 8- fit back on car and job done before and after
|
|